This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (January 2008)

The International System of Units (SI) specifies a set of unit prefixes known as SI prefixes or metric prefixes. An SI prefix is a name that precedes a basic unit of measure to indicate a decimal multiple or fraction of the unit. Each prefix has a unique symbol that is prepended to the unit symbol. The SI prefixes are standardized by the International Bureau of Weights and Measures in resolutions dating from 1960 to 1991.1 Their usage is not limited to SI units and many of these date back to the introduction of the metric system in the 1790s.

SI prefixes are used to reduce the number of zeros shown in numerical quantities before or after a decimal point. For example, an electrical current of 0.000000001ampere, or one-billionth (short scale) of an ampere, is written by using the SI-prefix nano as 1 nanoampere or 1 nA.

Contents 1 List of SI prefixes 1.1 Examples 2 General use of prefix names and symbols 3 SI prefixes with symbols for time and angles 4 SI prefixes for temperature in °C 5 Exponentiation of symbols 6 Pronunciation 7 Other and obsolete prefixes 7.1 Non-SI units 7.2 Similar prefixes as abbreviations 8 Units used in computing and telecommunications 8.1 Binary prefixes 9 Proposed changes 9.1 Hella- 10 See also 11 References 12 External links // List of SI prefixes

The International System of Units specifies twenty SI prefixes:

SI prefixes Prefix Symbol 1000m 10n Decimal Short scale Long scale Since[1] yotta Y 10008 1024 1000000000000000000000000 Septillion Quadrillion 1991 zetta Z 10007 1021 1000000000000000000000 Sextillion Trilliard 1991 exa E 10006 1018 1000000000000000000 Quintillion Trillion 1975 peta P 10005 1015 1000000000000000 Quadrillion Billiard 1975 tera T 10004 1012 1000000000000 Trillion Billion 1960 giga G 10003 109 1000000000 Billion Milliard 1960 mega M 10002 106 1000000 Million 1960 kilo k 10001 103 1000 Thousand 1795 hecto h 10002⁄3 102 100 Hundred 1795 deca da 10001⁄3 101 10 Ten 1795 10000 100 1 One deci d 1000−1⁄3 10−1 0.1 Tenth 1795 centi c 1000−2⁄3 10−2 0.01 Hundredth 1795 milli m 1000−1 10−3 0.001 Thousandth 1795 micro μ 1000−2 10−6 0.000001 Millionth 1960[2] nano n 1000−3 10−9 0.000000001 Billionth Milliardth 1960 pico p 1000−4 10−12 0.000000000001 Trillionth Billionth 1960 femto f 1000−5 10−15 0.000000000000001 Quadrillionth Billiardth 1964 atto a 1000−6 10−18 0.000000000000000001 Quintillionth Trillionth 1964 zepto z 1000−7 10−21 0.000000000000000000001 Sextillionth Trilliardth 1991 yocto y 1000−8 10−24 0.000000000000000000000001 Septillionth Quadrillionth 1991 The metric system was introduced in 1795 with six prefixes. The other dates relate to recognition by a resolution of the CGPM. The 1948 recognition of the micron by the CGPM was abrogated in 1967. Examples 5 cm = 5×10^−2 m = 5×0.01m = 0.05m 3 MW = 3×10^6 W = 3×1000000W = 3000000W General use of prefix names and symbols

Twenty SI prefixes are available to combine with units of measure. For example, the prefix kilo- denotes a multiple of one thousand, so 1 kilometre equals 1000 metres, 1 kilogram equals 1000 grams, 1 kilowatt equals 1000 watts, and so on. Each SI prefix name has an associated symbol which can be used in combination with the symbols for units of measure. Thus, the "kilo-" symbol, k, can be used to produce km, kg, and kW, (kilometre, kilogram, and kilowatt). SI prefixes are internationally recognized and also exist outside the SI (many of them long pre-date SI, going back to the original introduction of the metric system); prefixes may also be used in combination with non-SI units; for example: milligauss (mG), kilofoot (kft) and microinch (µin).

Prefixes may not be used in combination. This even applies for mass, for which the SI base unit (which is the kilogram, not the gram) already contains a prefix. So milligram (mg) is used instead of microkilogram (µkg), for example.

Prefixes corresponding to an exponent that is divisible by three are often recommended. Hence "100 m" rather than "1 hm" (hectometre) or "10 dam" (decametres). The "non-three" prefixes (hecto-, deca-, deci-, and centi-) are however more commonly used for everyday purposes than in science.

SI prefixes with symbols for time and angles

Official policies about the use of these prefixes vary slightly between the Bureau International des Poids et Mesures (BIPM) and the American National Institute of Standards and Technology (NIST); and some of the policies of both bodies are at variance with everyday practice. For instance, the NIST advises that "…to avoid confusion, prefix symbols (and prefixes) are not used with the time-related unit symbols (names) min (minute), h (hour), d (day); nor with the angle-related symbols (names) ° (degree), ′ (minute), and ″ (second)." 2 The BIPM’s position on the use of SI prefixes with units of time larger than the second is the same as that of the NIST but their position with regard to angles differs: they state "However astronomers use milliarcsecond, which they denote mas, and microarcsecond, µas, which they use as units for measuring very small angles." 3

SI prefixes for temperature in °C

Official policy also varies from common practice for the degree Celsius (°C). NIST states; "Prefix symbols may be used with the unit symbol °C and prefixes may be used with the unit name 'degree Celsius'. For example, 12 m°C (12 millidegrees Celsius) is acceptable." However the use of prefixed forms of "°C" (such as "µ°C") has not been adopted in science and engineering; prefixed forms of the kelvin are usually used instead.

Exponentiation of symbols

When units occur in exponentiation, for example, in square and cubic forms, any size prefix is considered part of the unit, and thus included in the exponentiation.

1km2 means one square kilometre or the size of a square of 1000 m by 1000 m and not 1000 square metres. 2Mm3 means two cubic megametre or the size of two cubes of 1000000m by 1000000m by 1000000m or 2×10^18 m3, and not 2000000cubic metres (2×10^6 m3). Pronunciation

There are two accepted pronunciations for the prefix giga-: /ˈɡɪɡə/ and /ˈdʒɪɡə/. According to the American writer Kevin Self, in the 1920s a German committee member of the International Electrotechnical Commission proposed giga- as a prefix for 109, drawing on a verse by the humorous poet Christian Morgenstern that appeared in the third (1908) edition of Galgenlieder (Gallows Songs). This suggests a hard German g was originally intended as the pronunciation. Self was unable to ascertain at what point the /dʒ/ (soft g) pronunciation became accepted, but as of 1995 current practice had returned to /ɡ/ (hard g). 4 5

When an SI prefix is affixed to a root word, the prefix carries the stress, while the root drops its stress but retains a full vowel in the syllable that is stressed when the root word stands alone. For example, gigabyte is pronounced /ˈɡɪɡəbaɪt/, with stress on the first syllable. However, words in common use outside the scientific community may follow idiosyncratic stress rules. For example, kilometre is commonly pronounced /kɨˈlɒmɨtər/, with reduced vowels on both syllables of metre.

Other and obsolete prefixes See also: Non-SI unit prefixes

The prefix myria-, 67 denoting a factor of 10000, originated from the Greek μύριοι (mýrioi) for ten thousand, and the prefixes demi and double, denoting a factors of 1/2 and 2, respectively,8 were parts of the original metric system adopted by France in 1795. These were not retained when the SI prefixes were internationally adopted by the 11th CGPM conference in 1960. They were dropped because they were not decimal, nor symmetrical.

Double prefixes such as those formerly used in micromicrofarads (picofarads), hectokilometres (100 kilometres), and millimicrons or micromillimetres (both nanometres) were disallowed with the introduction of the SI. The choice of commonly used prefixes with a given unit is usually dictated by convenience of use, unit prefixes that are much larger or smaller than encountered in practice, are seldom used, albeit valid combinations. In most contexts only a few, the most common, standard combination are established:

Mass: hectogram, gram, milligram, microgram, and smaller are common. However, megagram or larger are rarely used; tonnes (and kilotonnes etc.) or scientific notation are used instead. Megagram is occasionally used to disambiguate the (metric) tonne from the various (non-metric) tons. Volume in litres: litre, decilitre, centilitre, millilitre, microlitre, and smaller are common. Larger volumes are sometimes denoted in hectolitres; otherwise in cubic metres or cubic kilometres. In Australia, large quantities of water are measured in kilolitres, megalitres and gigalitres. Length: kilometre, metre, decimetre, centimetre, millimetre, and smaller are common. The micrometre is often referred to by the non-SI term micron. In some fields such as chemistry, the ångström (equal to 0.1 nm) competes with the nanometre. The femtometre, used mainly in particle physics, is usually called a fermi. For large scales, megametre, gigametre, and larger are rarely used. Often used are astronomical units, light years, and parsecs; the astronomical unit is mentioned in the SI standards as an accepted non-SI unit. Time: second, millisecond, microsecond, and shorter are common. The kilosecond and megasecond also have some use, though for these and longer times one usually uses either scientific notation or minutes, hours, and so on.

† the United Kingdom, Ireland, Australia and New Zealand previously used the long scale number name conventions, but have now at least partly switched to the short scale usage. In particular, above a million and below a millionth, the same name has different values in the two naming systems, so billion and trillion (for example) have unfortunately become potentially ambiguous terms internationally. Using the SI prefixes can circumvent this problem.

Non-SI units The use of prefixes can be traced back to the introduction of the metric system in the 1790s, long before the SI was introduced in 1960. The prefixes, including those introduced after the introduction of the SI, are used with any metric units, whether officially included in the SI or not (e.g., millidynes). SI prefixes rarely appear with imperial units or English units except in some special cases (e.g., microinches, kilofeet, kilopound or 'kip'). They are also used with other specialized units used in particular fields (e.g., megaelectronvolts, gigaparsecs). They are also occasionally used with currency units (e.g., gigadollar), mainly by people who are familiar with the prefixes from scientific usage. Similar prefixes as abbreviations

The symbol K is often used informally to mean a multiple of thousand in many contexts. For example, one may talk of a 40K salary (40 000), or call the Year 2000 problem as Y2K problem. In these cases an uppercase K is often used, although the uppercase K is the official symbol of the kelvin.

In other financial and business contexts, the letter M is often used to denote multiplication by 1000, in recognition of the Latin term mille, also used in roman numerals. In these situations one million is often written as 1 MM. In other financial situations, one M can mean million, such as £2M or £2m which is equal to £2 000 000. Similar usage of M occurs in the term CPM (Cost per mille) used in advertising.

For nearly a century, the electrical construction industry used the acronym "MCM" to designate a "thousand circular mils" in specifying thicknesses of large electrical cables. Since the mid-1990s, the term "kcmil" has been adopted as the "official" designation of a thousand circular mils, but the designation "MCM" still remains in wide use.

Units used in computing and telecommunications

The International System of Units does not define units of information, such as the storage size units bit and byte. This has allowed ambiguities to emerge with respect to the symbols in use, as well as their usage and meaning in combination with the SI prefixes. The bit is often given the symbol bit or b, while byte is usually written as byte, B, and occasionally as b. Thus, kb/s often means kilobits per second, but may sometimes refer to kilobytes per second.

The National Institute of Standards and Technology in the United States has suggested the use of bit for bits and B for bytes.9

In non-standard use, K is often used as a symbol prefix to the units bit and byte to designate the binary prefix kibi = 210 = 1024.

Binary prefixes Main article: Binary prefix

The prefixes kilo, mega, giga and greater are often used in combination with the storage size units bit and byte.

The binary multiple 210 = 1024 is close to the value 1000 of the prefix kilo, therefore computer professionals have historically used the unit kilobyte to refer to 1024 bytes of computer memory, in non-conformance with the SI definition of the prefix kilo. Likewise, 220 = 1048576, which is close to 1000000 has been expressed with the mega prefix. This has led to some confusion, because megabyte is commonly used to refer to 1000000bytes in the specifications of hard disk drive capacities and network transmission bit rates.

To eliminate this ambiguity the International Electrotechnical Commission (IEC) adopted new binary prefixes in 1998 (IEC 80000-13:2008 formerly subclauses 3.8 and 3.9 of IEC 60027-2:2005). Each binary prefix is formed from the first syllable of the decimal prefix with the similar value, and the syllable 'bi' (pronounced 'bee'). The symbols are the decimal symbol, always capitalized, followed by the letter 'i'.

According to this standard one kilobyte (1 kB) is 1000 bytes, whereas one kibibyte (1 KiB) is 1024 bytes. Likewise mebi (Mi; 220), gibi (Gi; 230), tebi (Ti; 240), pebi (Pi; 250), exbi (Ei; 260), zebi (Zi; 270) and yobi (Yi; 280).

The use of these new binary prefixes is increasing,10 but is largely limited to technical literature and new computer software.

Proposed changes This section does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (August 2010)

There are proposals for further harmonization of the capitalization rules.citation needed Accordingly, the symbols for kilo, hecto, and deca would be changed from ‘k’ to ‘K’, from ‘h’ to ‘H’, and from ‘da’ to ‘D’. Likewise, some lobby for the removal of prefixes that do not fit the 10±3n scheme, namely hecto, deca, deci, and centi.citation needed The CGPM has postponed its decision on both matters for now.citation needed

Hella-

As of 2010, an online petition seeks to establish "hella" as the SI prefix for 1027.11 The prefix, which has since appeared in the San Francisco Chronicle, Daily Telegraph, and Wired, was recognized by Google in May 2010.121314 To put this into perspective, the estimated size of the universe would be 1 Hellameter in diameter.

See also Binary prefix Engineering notation Metric system Non-SI unit prefix Number names Numbers in various languages (for comparison/etymology) Orders of magnitude Scientific notation SI base unit SI derived unit Number prefix References

This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.

^ Four Resolutions ^ http://physics.nist.gov/Pubs/SP811/sec06.html ^ http://www.bipm.fr/en/si/si_brochure/chapter3/prefixes.html ^ Self, Kevin (October 1994). "Technically speaking". Spectrum (IEEE): 18.  ^ Self, Kevin (April 1995). "Technically speaking". Spectrum (IEEE): 16.  ^ 29th Congress of the United States, Session 1 (1866-05-13). "H.R. 596, An Act to authorize the use of the metric system of weights and measures". http://lamar.colostate.edu/~hillger/laws/metric-act-bill.html.  ^ D. Brewster (1830). The Edinburgh Encyclopaedia. p. 494. http://books.google.com/books?id=h6miHpDMjXEC&pg=PA494.  ^ histoire.du.metre.free.fr ^ Ambler Thompson, Barry N. Taylor. (2008). Guide for the Use of the International System of Units (SI). Gaithersburg, MD: National Institute of Standards and Technology p. 74. This source recommends B as a symbol for byte, but is silent concerning bits. ^ Sadat Karim, neowin.net (2010-03-27). "Ubuntu implements units policy, will switch to base-10 units in future release". http://www.neowin.net/news/ubuntu-implements-units-policy-will-switch-to-base-10-units-in-future-release.  ^ Moore, Matthew (2010-03-02). "Hella number: scientists call for new word for 1,000,000,000,000,000,000,000,000,000". The Telegraph. http://www.telegraph.co.uk/science/science-news/7352204/Hella-number-scientists-call-for-new-word-for-1000000000000000000000000000.html. Retrieved 2010-06-04. "More than 20,000 scientists, students and members of the public have signed an online petition backing the new quantity, which would be used for figures with 27 zeros after the first digit."  ^ "Jargon Watch". Wired 18 (6). June 2010. "...a proposed metric prefix...useful for describing mega-measurements like Earth's mass (6 Hellagrams). The International Committee for Weights and Measures agreed to consider itcitation needed after a Facebook petition garnered 30,000 signatures".  ^ "The Official Petition to Establish "Hella-" as the SI Prefix for 10^27". Facebook. http://www.facebook.com/pages/The-Official-Petition-to-Establish-Hella-as-the-SI-Prefix-for-1027/277479937276?v=info. Retrieved 2010-06-04.  ^ Kim, Ryan (2010-05-24). "Google gets behind 'hella' campaign". The San Francisco Chronicle. http://www.sfgate.com/cgi-bin/blogs/techchron/detail?&entry_id=64240. Retrieved 2010-06-04.  External links Bureau International des Poids et Mesures (BIPM) SI prefixes at BIPM US NIST Definitions of the SI units: The twenty SI prefixes US NIST Definitions of the SI units: The binary prefixes International Standard ISO 2955: "Information processing - Representation of SI and other units in Systems with limited Character sets"[Withdrawn] ISO 1000:2004 "SI Units and recommendations for the use of their multiples and of certain other units" Proposal for an extension of the SI-prefix system to even larger and smaller units, by a computer scientist (not an official proposal by an organization). v • d • e SI units Base units Ampere · Candela · Kelvin · Kilogram · Metre · Mole · Second Derived units Becquerel · Coulomb · degree Celsius · Farad · Gray · Henry · Hertz · Joule · Katal · Lumen · Lux · Newton · Ohm · Pascal · Radian · Siemens · Sievert · Steradian · Tesla · Volt · Watt · Weber Accepted for use with SI Atomic mass unit · Astronomical unit · Day · Decibel · Degree of arc · Electronvolt · Hectare · Hour · Litre · Minute · Minute of arc · Neper · Second of arc · Tonne Atomic units · Natural units See also SI prefixes · Systems of measurement · Conversion of units Book:International System of Units  · Category:SI base units
Definitions of the SI units: The twenty SI prefixes
The 20 SI prefixes used to form decimal multiples and submultiples of ... Because the SI prefixes strictly represent powers of 10, they should not be used to ...
physics.nist.gov/cuu/Units/prefixes.html

prefixes for binary multiples have been adopted by the International Electrotechnical Commission IEC for use in information technology Thus the correct SI prefixes for binary numbers are That is why in this case the space reported by an OS except Snow Leopard is wrong and should use kibi mebi and gibi instead to properly distinguish itself from the prefixes for


Prefix 032 - Zapada (The Snow)

Si Prefixes: Si Prefix, Mega-, Kilo-, Giga-, Tera-, Peta-, Atto-, Micro-, Deci-, Exa-, Yotta-, Deca-, Nano-, Hecto-, Zetta-, Femto-, Pico- Books LLC
SI prefix
An SI prefix is a name that precedes a basic unit of measure to indicate a decimal multiple or fraction of ... The SI prefixes are standardized by the International Bureau of ...
plumbot.com/SI-prefix.html

Provenienza Spagna Portogallo Francia


how to hack utorrent up to 7x faster downloads 2010

Numeration: Numeral System, si Prefix, Roman Numerals, Binary-Coded Decimal, Maya Numerals, Scientific Notation, Binary Prefix Books LLC
SI prefix - Definition
SI prefix - Definition. An SI prefix is a prefix which can be applied to any unit of the International System of Units (SI) to give subdivisions and multiples of that unit. ...
www.wordiq.com/definition/SI_prefix

a ver si es verdad lo de las £5 000 En una fecha anterior al 1 de septiembre de 2001 la primera letra no se podía cambiar e iban de acuerdo a la fecha de matriculación siguiendo esta tabla En este caso las matriculaciones posteriores al 1 de agosto de 1983 y anteriores al 1 de septiembre de 2001 se ponía la letra al principio de la matrícula y las registradas


Prefix 990 si Parlament clip4

SI Prefix Betascript Publishing
SI prefix - WikiBioPharm
SI prefixes are used to reduce the quantity of zeros in numerical equivalencies. ... Using an SI prefix, these are equivalent to 1 nanoampere and 1 nA. ...
www.wikibiopharm.com/index.php?title=SI_prefix

to thinking that SATA2 is the latter which is again fundamentally wrong The terms kilo mega and giga are all standard SI unit prefixes along with other prefixes shown in this table Because the SI prefixes strictly represent powers of 10 they should not be used to represent powers of 2 Thus one kilobit or 1 kbit is 1000 bit and not 210 bit = 1024 bit To


Prefix 990 si Parlament clip3

Kilogram: SI base unit, Mass, International System of Units, SI prefix, Weight, Newton, Mass versus weight, Kilogram-force,United States customary units, Force, Grave (mass) Alphascript Publishing
SI prefix - Encyclopedia of Earth
The twenty SI prefixes used to form decimal multiples and submultiples of ... The SI system is different that the binary prefix system that is used in ...
www.eoearth.org/article/SI_prefix

numerical values of various physical quantities from one unit to another unit This software supports the conversion of more than 40 different physical quantities among various unit systems


Prefix 990 si Parlament clip2

Scientific Notation: Scientific Notation, Binary Prefix, Floating Point, ISO 31-11, SI Prefix, Significant Figures, International Organization for Standardization Betascript Publishing
NIST: NIST Guide to the SI
4 The Two Classes of SI Units and the SI Prefixes. Since the 1995 edition of this Guide, ... Table 5 gives the SI prefixes that are used to form decimal multiples and ...
physics.nist.gov/Pubs/SP811/sec04.html

32 prefix loopback interface on S1 is announced into the area 0 as a summary type 3 Link State Advertisement LSA as shown in Figure 2 Figure 2 Generation of inter area summary LSA The contents of the LSA are displayed in Listing 2 The LSA contains only the prefix and the cost toward the prefix typical distance vector information Even the area in which the prefix


Prefix 990 si Parlament clip1

Multiple D'unité de Mesure: Préfixes Du Système International D'unités, Kilo, Téra, Giga, Péta, Femto, Préfixe Binaire, Préfixe D'unité Non-Si (French Edition) Books LLC
SI prefix - Wikinfo
An SI prefix is a prefix which can be applied to any unit of the International System of Units (SI) to give subdivisions and multiples of that unit. ...
www.wikinfo.org/index.php/SI_prefix

e mail | fotogallery


Prefix 990 si Parlament clip0

Medical Terminology For Dummies For Dummies
BIPM - SI prefixes
SI brochure, section 3.1. The 11th CGPM (1960, Resolution 12) adopted a series of prefixes ... These SI prefixes refer strictly to powers of 10. They should not be ...
www.bipm.org/en/si/prefixes.html

prefix for tables in database zde si zvolíte prefix tabulek doporučujeme neměnit údaje k databázi čtvrtý krok instalace Po připojení k databázi Vás instalátor vyzve k zadání administrátorského jména hesla a mailu Políčka confirm jsou pak pouze


Liviu Nechita _ Unda si Nu uita.mpg

si è conclusa con un secondo posto nella competizione di coppa Marche serie D finale persa contro la Tenax castelfidardo e un 6° posto in campionatoad 1 punto dai play off


Torrent Hack - speed up 9x

orders In this procedure you simply enter the service order number employee ID date hours and rates This selection will display the following input screen Enter S O Number Type the service order number here Note for speed the SO prefix has been dropped from this field 1 Employee ID


Super Hack U torrent